Struct hyper::server::conn::AddrStream

source · [−]

pub struct AddrStream { /* private fields */ }

Expand description

A transport returned yieled by AddrIncoming.

Implementations

source

impl AddrStream

source

pub fn remote_addr(&self) -> SocketAddr

Returns the remote (peer) address of this connection.

source

pub fn into_inner(self) -> TcpStream

Consumes the AddrStream and returns the underlying IO object

Trait Implementations

source

impl AsyncRead for AddrStream

source

unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8 ]) -> bool

Prepares an uninitialized buffer to be safe to pass to read. Returns true if the supplied buffer was zeroed out. Read more

source

fn read_buf<B: BufMut>(&mut self, buf: &mut B) -> Poll<usize, Error>

Pull some bytes from this source into the specified BufMut, returning how many bytes were read. Read more

source

fn poll_read(&mut self, buf: &mut [u8 ]) -> Result<Async<usize>, Error>

Attempt to read from the AsyncRead into buf. Read more

source

fn framed<T>(self, codec: T) -> Framed<Self, T> where
T: Encoder + Decoder,
Self: AsyncWrite,

👎 Deprecated since 0.1.7:

Use tokio_codec::Decoder::framed instead

Provides a Stream and Sink interface for reading and writing to this I/O object, using Decode and Encode to read and write the raw data. Read more

source

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
Self: AsyncWrite,

Helper method for splitting this read/write object into two halves. Read more

source

impl AsyncWrite for AddrStream

source

fn shutdown(&mut self) -> Poll<(), Error>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down. Read more

source

fn write_buf<B: Buf>(&mut self, buf: &mut B) -> Poll<usize, Error>

Write a Buf into this value, returning how many bytes were written. Read more

source

fn poll_write(&mut self, buf: &[u8 ]) -> Result<Async<usize>, Error>

Attempt to write bytes from buf into the object. Read more

source

fn poll_flush(&mut self) -> Result<Async<()>, Error>

Attempt to flush the object, ensuring that any buffered data reach their destination. Read more

source

impl Debug for AddrStream

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

source

impl Read for AddrStream

source

fn read(&mut self, buf: &mut [u8 ]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more

1.36.0 · source

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers. Read more

source

fn is_read_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation. Read more

1.0.0 · source

fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf. Read more

1.0.0 · source

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf. Read more

1.6.0 · source

fn read_exact(&mut self, buf: &mut [u8 ]) -> Result<(), Error>

Read the exact number of bytes required to fill buf. Read more

source

fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<(), Error>

🔬 This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer. Read more

source

fn read_buf_exact(&mut self, buf: &mut ReadBuf<'_>) -> Result<(), Error>

🔬 This is a nightly-only experimental API. (read_buf)

Read the exact number of bytes required to fill buf. Read more

1.0.0 · source

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adaptor for this instance of Read. Read more

1.0.0 · source

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an Iterator over its bytes. Read more

1.0.0 · source

fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,

Creates an adapter which will chain this stream with another. Read more

1.0.0 · source

fn take(self, limit: u64) -> Take<Self>

Creates an adapter which will read at most limit bytes from it. Read more

source

impl Write for AddrStream

source

fn write(&mut self, buf: &[u8 ]) -> Result<usize>

Write a buffer into this writer, returning how many bytes were written. Read more

source

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

1.36.0 · source

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers. Read more

source

fn is_write_vectored(&self) -> bool

🔬 This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation. Read more

1.0.0 · source

fn write_all(&mut self, buf: &[u8 ]) -> Result<(), Error>

Attempts to write an entire buffer into this writer. Read more

source

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬 This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer. Read more

1.0.0 · source

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered. Read more

1.0.0 · source

fn by_ref(&mut self) -> &mut Self

Creates a “by reference” adapter for this instance of Write. Read more

Auto Trait Implementations

impl !RefUnwindSafe for AddrStream

impl Send for AddrStream

impl Sync for AddrStream

impl Unpin for AddrStream

impl !UnwindSafe for AddrStream

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

pub fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

pub fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<R> ReadBytesExt for R where
R: Read + ?Sized,

source

fn read_u8(&mut self) -> Result<u8, Error>

Reads an unsigned 8 bit integer from the underlying reader. Read more

source

fn read_i8(&mut self) -> Result<i8, Error>

Reads a signed 8 bit integer from the underlying reader. Read more

source

fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,

Reads an unsigned 16 bit integer from the underlying reader. Read more

source

fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,

Reads a signed 16 bit integer from the underlying reader. Read more

source

fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,

Reads an unsigned 24 bit integer from the underlying reader. Read more

source

fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,

Reads a signed 24 bit integer from the underlying reader. Read more

source

fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,

Reads an unsigned 32 bit integer from the underlying reader. Read more

source

fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,

Reads a signed 32 bit integer from the underlying reader. Read more

source

fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,

Reads an unsigned 48 bit integer from the underlying reader. Read more

source

fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,

Reads a signed 48 bit integer from the underlying reader. Read more

source

fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,

Reads an unsigned 64 bit integer from the underlying reader. Read more

source

fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,

Reads a signed 64 bit integer from the underlying reader. Read more

source

fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder,

Reads an unsigned 128 bit integer from the underlying reader. Read more

source

fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder,

Reads a signed 128 bit integer from the underlying reader. Read more

source

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader. Read more

source

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader. Read more

source

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader.

source

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader.

source

fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more

source

fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more

source

fn read_u16_into<T>(&mut self, dst: &mut [u16 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more

source

fn read_u32_into<T>(&mut self, dst: &mut [u32 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more

source

fn read_u64_into<T>(&mut self, dst: &mut [u64 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more

source

fn read_u128_into<T>(&mut self, dst: &mut [u128 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more

source

fn read_i8_into(&mut self, dst: &mut [i8 ]) -> Result<(), Error>

Reads a sequence of signed 8 bit integers from the underlying reader. Read more

source

fn read_i16_into<T>(&mut self, dst: &mut [i16 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of signed 16 bit integers from the underlying reader. Read more

source

fn read_i32_into<T>(&mut self, dst: &mut [i32 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of signed 32 bit integers from the underlying reader. Read more

source

fn read_i64_into<T>(&mut self, dst: &mut [i64 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of signed 64 bit integers from the underlying reader. Read more

source

fn read_i128_into<T>(&mut self, dst: &mut [i128 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of signed 128 bit integers from the underlying reader. Read more

source

fn read_f32_into<T>(&mut self, dst: &mut [f32 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more

source

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32 ]) -> Result<(), Error> where
T: ByteOrder,

👎 Deprecated since 1.2.0:

please use read_f32_into instead

DEPRECATED. Read more

source

fn read_f64_into<T>(&mut self, dst: &mut [f64 ]) -> Result<(), Error> where
T: ByteOrder,

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more

source

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64 ]) -> Result<(), Error> where
T: ByteOrder,

👎 Deprecated since 1.2.0:

please use read_f64_into instead

DEPRECATED. Read more

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

source

impl<W> WriteBytesExt for W where
W: Write + ?Sized,

source

fn write_u8(&mut self, n: u8) -> Result<(), Error>

Writes an unsigned 8 bit integer to the underlying writer. Read more

source

fn write_i8(&mut self, n: i8) -> Result<(), Error>

Writes a signed 8 bit integer to the underlying writer. Read more

source

fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 16 bit integer to the underlying writer. Read more

source

fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 16 bit integer to the underlying writer. Read more

source

fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 24 bit integer to the underlying writer. Read more

source

fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 24 bit integer to the underlying writer. Read more

source

fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 32 bit integer to the underlying writer. Read more

source

fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 32 bit integer to the underlying writer. Read more

source

fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 48 bit integer to the underlying writer. Read more

source

fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 48 bit integer to the underlying writer. Read more

source

fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 64 bit integer to the underlying writer. Read more

source

fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 64 bit integer to the underlying writer. Read more

source

fn write_u128<T>(&mut self, n: u128) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned 128 bit integer to the underlying writer.

source

fn write_i128<T>(&mut self, n: i128) -> Result<(), Error> where
T: ByteOrder,

Writes a signed 128 bit integer to the underlying writer.

source

fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned n-bytes integer to the underlying writer. Read more

source

fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

Writes a signed n-bytes integer to the underlying writer. Read more

source

fn write_uint128<T>(&mut self, n: u128, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

Writes an unsigned n-bytes integer to the underlying writer. Read more

source

fn write_int128<T>(&mut self, n: i128, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

Writes a signed n-bytes integer to the underlying writer. Read more

source

fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder,

Writes a IEEE754 single-precision (4 bytes) floating point number to the underlying writer. Read more

source

fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder,

Writes a IEEE754 double-precision (8 bytes) floating point number to the underlying writer. Read more

Struct hyper::server::conn::AddrStream

Implementations

impl AddrStream

pub fn remote_addr(&self) -> SocketAddr

pub fn into_inner(self) -> TcpStream

Trait Implementations

impl AsyncRead for AddrStream

unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8]) -> bool

fn read_buf<B: BufMut>(&mut self, buf: &mut B) -> Poll<usize, Error>

fn poll_read(&mut self, buf: &mut [u8]) -> Result<Async<usize>, Error>

fn framed<T>(self, codec: T) -> Framed<Self, T> where T: Encoder + Decoder, Self: AsyncWrite,

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where Self: AsyncWrite,

impl AsyncWrite for AddrStream

fn shutdown(&mut self) -> Poll<(), Error>

fn write_buf<B: Buf>(&mut self, buf: &mut B) -> Poll<usize, Error>

fn poll_write(&mut self, buf: &[u8]) -> Result<Async<usize>, Error>

fn poll_flush(&mut self) -> Result<Async<()>, Error>

impl Debug for AddrStream

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Read for AddrStream

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

fn is_read_vectored(&self) -> bool

fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<(), Error>

fn read_buf_exact(&mut self, buf: &mut ReadBuf<'_>) -> Result<(), Error>

fn by_ref(&mut self) -> &mut Self

fn bytes(self) -> Bytes<Self>

fn chain<R>(self, next: R) -> Chain<Self, R> where R: Read,

fn take(self, limit: u64) -> Take<Self>

impl Write for AddrStream

fn write(&mut self, buf: &[u8]) -> Result<usize>

fn flush(&mut self) -> Result<()>

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

fn is_write_vectored(&self) -> bool

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

fn by_ref(&mut self) -> &mut Self

Auto Trait Implementations

impl !RefUnwindSafe for AddrStream

impl Send for AddrStream

impl Sync for AddrStream

impl Unpin for AddrStream

impl !UnwindSafe for AddrStream

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<R> ReadBytesExt for R where R: Read + ?Sized,

fn read_u8(&mut self) -> Result<u8, Error>

fn read_i8(&mut self) -> Result<i8, Error>

fn read_u16<T>(&mut self) -> Result<u16, Error> where T: ByteOrder,

fn read_i16<T>(&mut self) -> Result<i16, Error> where T: ByteOrder,

fn read_u24<T>(&mut self) -> Result<u32, Error> where T: ByteOrder,

fn read_i24<T>(&mut self) -> Result<i32, Error> where T: ByteOrder,

fn read_u32<T>(&mut self) -> Result<u32, Error> where T: ByteOrder,

fn read_i32<T>(&mut self) -> Result<i32, Error> where T: ByteOrder,

fn read_u48<T>(&mut self) -> Result<u64, Error> where T: ByteOrder,

fn read_i48<T>(&mut self) -> Result<i64, Error> where T: ByteOrder,

fn read_u64<T>(&mut self) -> Result<u64, Error> where T: ByteOrder,

fn read_i64<T>(&mut self) -> Result<i64, Error> where T: ByteOrder,

fn read_u128<T>(&mut self) -> Result<u128, Error> where T: ByteOrder,

fn read_i128<T>(&mut self) -> Result<i128, Error> where T: ByteOrder,

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where T: ByteOrder,

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where T: ByteOrder,

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where T: ByteOrder,

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where T: ByteOrder,

fn read_f32<T>(&mut self) -> Result<f32, Error> where T: ByteOrder,

fn read_f64<T>(&mut self) -> Result<f64, Error> where T: ByteOrder,

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where T: ByteOrder,

unsafe fn prepare_uninitialized_buffer(&self, buf: &mut [u8 ]) -> bool

fn poll_read(&mut self, buf: &mut [u8 ]) -> Result<Async<usize>, Error>

fn framed<T>(self, codec: T) -> Framed<Self, T> where
T: Encoder + Decoder,
Self: AsyncWrite,

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>) where
Self: AsyncWrite,

fn poll_write(&mut self, buf: &[u8 ]) -> Result<Async<usize>, Error>

fn read(&mut self, buf: &mut [u8 ]) -> Result<usize>

fn read_exact(&mut self, buf: &mut [u8 ]) -> Result<(), Error>

fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,

fn write(&mut self, buf: &[u8 ]) -> Result<usize>

fn write_all(&mut self, buf: &[u8 ]) -> Result<(), Error>

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<R> ReadBytesExt for R where
R: Read + ?Sized,

fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,

fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,

fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,

fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,

fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,

fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,

fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,

fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,

fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,

fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,

fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder,

fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder,

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder,

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder,

fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,

fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,

fn read_u16_into<T>(&mut self, dst: &mut [u16 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_u32_into<T>(&mut self, dst: &mut [u32 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_u64_into<T>(&mut self, dst: &mut [u64 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_u128_into<T>(&mut self, dst: &mut [u128 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_i8_into(&mut self, dst: &mut [i8 ]) -> Result<(), Error>

fn read_i16_into<T>(&mut self, dst: &mut [i16 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_i32_into<T>(&mut self, dst: &mut [i32 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_i64_into<T>(&mut self, dst: &mut [i64 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_i128_into<T>(&mut self, dst: &mut [i128 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_f32_into<T>(&mut self, dst: &mut [f32 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_f64_into<T>(&mut self, dst: &mut [f64 ]) -> Result<(), Error> where
T: ByteOrder,

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64 ]) -> Result<(), Error> where
T: ByteOrder,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

impl<W> WriteBytesExt for W where
W: Write + ?Sized,

fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder,

fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder,

fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,

fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,

fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,

fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,

fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,

fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,

fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,

fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,

fn write_u128<T>(&mut self, n: u128) -> Result<(), Error> where
T: ByteOrder,

fn write_i128<T>(&mut self, n: i128) -> Result<(), Error> where
T: ByteOrder,

fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

fn write_uint128<T>(&mut self, n: u128, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

fn write_int128<T>(&mut self, n: i128, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,

fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder,

fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder,